To make the head, you prepare Pittsburgh Penguins Legends team signature shirt two small bamboo sticks, about 9-10cm short, tied to the shaft and then tied to the other end into a sharp nose. Similarly, the tail is also two bamboo bars but longer, about 20-30cm, tied into a triangle. However, a sharp tip of the triangle will be tightly attached to the axis of the shaft (at about 1/3 of the axis), the acute angle of about 70 degrees is moderate. Once you have the frame, then you paste the paper. If the paper is small, you must stick to each piece of the wing and must be tight. The paper is covered on the kite, clipped in a line, pulled flat and then glued to the edges of the bamboo. Head and tail are similar. The last part is the rope (tie).
Pittsburgh Penguins Legends team signature shirt, hoodie, sweater and V-neck t-shirt
Best Pittsburgh Penguins Legends team signature shirt
You have to punch two small holes onPittsburgh Penguins Legends team signature shirt the paper sticking to the top of the wings (two small holes weighed between the shaft, from the shaft to a hole about 10-15cm), tying the ends of the rope about 3cm into the two holes to get a part of lèo. Next take a piece of string about 30cm tied to the midpoint of the previous string, the other end tied to the tail of the shaft. And the string connected to your coil will tie into the second piece, tied firmly but still move on the second string to adjust. The main part is about 3-5cm (on the second piece of string from the part tied with the first string). So you’ve got a paper crow kite.